BasicTimer4X - Revision history

Admin: /* Software */

2022-01-20T17:38:40Z

Software

← Older revision		Revision as of 17:38, 20 January 2022
Line 102:		Line 102:
	\|-		\|-
	\|Website		\|Website
	\|https://www.rapmas.com/~~BasicTimerX4~~		\|https://www.rapmas.com/BasicTimer4X
	\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.		\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.

Admin: /* Software */

2021-12-18T09:17:13Z

Software

← Older revision		Revision as of 09:17, 18 December 2021
Line 102:		Line 102:
	\|-		\|-
	\|Website		\|Website
	\|~~<small>[~~https://www.rapmas.com/BasicTimerX4 ~~www.rapmas.com/HydroLevelControl/]</small>~~		\|https://www.rapmas.com/BasicTimerX4
	\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.		\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.

Admin: /* Software */

2021-12-18T08:44:23Z

Software

← Older revision		Revision as of 08:44, 18 December 2021
Line 94:		Line 94:
	\|Size		\|Size
	\|4MB		\|4MB
			\|-
			\|Download
			\|[https://download.rapmas.com/BasicTimer_4X.exe BasicTimer_4X.exe]
	\|-		\|-
	\|Licence		\|Licence
			\|Freeware
	\|Proprietary software
	\|-		\|-
	\|Website		\|Website
Line 103:		Line 106:

	=== Installation ===		=== Installation ===
	The installer can be downloaded online. After starting the install process, You will be asked to choose the language of the installation. Please note that a chosen language will be the default language at the first start of the program. It can be changed later at any time. Executable and the supporting files will be installed (by default) to the Program Files folder, and can be started from the Start menu. Also in the Start menu can be accessed Uninstaller.		The installer can be [https://download.rapmas.com/BasicTimer_4X.exe downloaded online]. After starting the install process, You will be asked to choose the language of the installation. Please note that a chosen language will be the default language at the first start of the program. It can be changed later at any time. Executable and the supporting files will be installed (by default) to the Program Files folder, and can be started from the Start menu. Also in the Start menu can be accessed Uninstaller.

	=== Configuration ===		=== Configuration ===

Admin: /* USB connection */

2021-12-10T11:29:47Z

USB connection

← Older revision		Revision as of 11:29, 10 December 2021
Line 77:		Line 77:
	=== USB connection ===		=== USB connection ===
	With a USB connection, You can power up the device, if You have no 220VAC and You can configure the parameters. Connecting will be done with a USB mini cable (the cable will be NOT delivered in a package). Connect the USB to the device and to PC. Wait 10 seconds that a device boot up and start the BasicTimer4X program to made a configuration.		With a USB connection, You can power up the device, if You have no 220VAC and You can configure the parameters. Connecting will be done with a USB mini cable (the cable will be NOT delivered in a package). Connect the USB to the device and to PC. Wait 10 seconds that a device boot up and start the BasicTimer4X program to made a configuration.
			[[File:Basictimer4x-inside.webp\|alt=BasicTimer 4X USB and LCD connectors\|center\|thumb\|BasicTimer 4X USB and LCD connectors]]

	== Software ==		== Software ==

Admin: /* LCD */

2021-12-10T11:22:17Z

LCD

← Older revision		Revision as of 11:22, 10 December 2021
Line 70:		Line 70:

	=== LCD ===		=== LCD ===
			[[File:Basictimer4x-lcd.webp\|alt=BasicTimer 4X LCD\|thumb\|BasicTimer 4X LCD]]
	To be able seeing the current state of any relay or from the whole device, we have installed one LCD. It have two lines, on the upper line is the relay number (R1 R2 R3 R4) and on the lower line is the relay status (On, Off or Out). The LCD is connected to the main PCB with a connector that can be detached in the time of service. The device will working no matter if the LCD is connected or not. If the LCD is disconnected, You can use the program BasicTimer4X to see which relay is on.		To be able seeing the current state of any relay or from the whole device, we have installed one LCD. It have two lines, on the upper line is the relay number (R1 R2 R3 R4) and on the lower line is the relay status (On, Off or Out). The LCD is connected to the main PCB with a connector that can be detached in the time of service. The device will working no matter if the LCD is connected or not. If the LCD is disconnected, You can use the program BasicTimer4X to see which relay is on.

Admin at 11:12, 10 December 2021

2021-12-10T11:12:44Z

← Older revision		Revision as of 11:12, 10 December 2021
Line 56:		Line 56:

	=== Relays ===		=== Relays ===
			[[File:Basictimer4x-relays-numbered.webp\|alt=BasicTimer 4X Relays\|thumb\|BasicTimer 4X Relays]]
	Relays are the most important part of the device. With a 4 independent relays, You can switch 4 devices, like, pumps, valves, etc. The relays can be used by load under 5A at 220VAC. Any higher load need to be done with contactor.		Relays are the most important part of the device. With a 4 independent relays, You can switch 4 devices, like, pumps, valves, etc. The relays can be used by load under 5A at 220VAC. Any higher load need to be done with contactor.

Admin: /* Specification */

2021-12-10T10:50:41Z

Specification

← Older revision		Revision as of 10:50, 10 December 2021
Line 5:		Line 5:

	== Specification ==		== Specification ==
	[[File:Basictimer4x-front.webp\|alt=BasicTimer 4x\|thumb\|BasicTimer 4x]]		[[File:Basictimer4x-front.webp\|alt=BasicTimer 4X\|thumb\|BasicTimer 4X]]
	{\| class="wikitable"		{\| class="wikitable"
	\|+Specification table		\|+Specification table

Admin: /* Power supply */

2021-12-10T10:50:14Z

Power supply

← Older revision		Revision as of 10:50, 10 December 2021
Line 43:		Line 43:

	=== Installation ===		=== Installation ===
			[[File:Basictimer4x-power-switch.webp\|alt=BasicTimer 4X Power and Switch connectors\|thumb\|BasicTimer 4X Power and Switch connectors]]
	The device have to be installed on DIN rails in electrical boxes. It have a dimension of 89mm X 107mm X 65mm, on a rail it will use 6 modules place. By installing leave always more cable, for a later manipulation. On a front side are 4 screws. Remove it and open a box. Detach the LCD cable from the PCB. Mount the bottom side on DIN rail and connect the wires to the relays. Please note that a relays have 3 pins (NO - Normally open, CO - Common and NC - Normally closed, from left to right). At this time, connect the USB mini cable to the device and configure it. Try the relay behavior, the timing and the switching function. On the PC, in the BasicTimer4X software, You can see which relays are opened. If all the functions working as needed, remove the USB mini cable and connect the LCD cable to the PCB. Connect the 220VAC power supply, and check again is everything working. Close the box with a screws.		The device have to be installed on DIN rails in electrical boxes. It have a dimension of 89mm X 107mm X 65mm, on a rail it will use 6 modules place. By installing leave always more cable, for a later manipulation. On a front side are 4 screws. Remove it and open a box. Detach the LCD cable from the PCB. Mount the bottom side on DIN rail and connect the wires to the relays. Please note that a relays have 3 pins (NO - Normally open, CO - Common and NC - Normally closed, from left to right). At this time, connect the USB mini cable to the device and configure it. Try the relay behavior, the timing and the switching function. On the PC, in the BasicTimer4X software, You can see which relays are opened. If all the functions working as needed, remove the USB mini cable and connect the LCD cable to the PCB. Connect the 220VAC power supply, and check again is everything working. Close the box with a screws.

Admin: /* Specification */

2021-12-10T10:44:53Z

Specification

← Older revision		Revision as of 10:44, 10 December 2021
Line 5:		Line 5:

	== Specification ==		== Specification ==
			[[File:Basictimer4x-front.webp\|alt=BasicTimer 4x\|thumb\|BasicTimer 4x]]
	{\| class="wikitable"		{\| class="wikitable"
	\|+Specification table		\|+Specification table

Admin: /* Software */

2021-12-05T17:53:04Z

Software

← Older revision		Revision as of 17:53, 5 December 2021
Line 76:		Line 76:
	== Software ==		== Software ==
	{\| class="wikitable" align="right"		{\| class="wikitable" align="right"
	! colspan="2" \|[[File:~~HydroLevelControl~~-~~Software~~.webp\|~~none~~\|thumb\|300x300px\|Main screen of ~~HidroLevelControl~~]]		! colspan="2" \|[[File:BasicTimer4X-software.webp\|alt=Main screen of BasicTimerX4\|center\|thumb\|300x300px\|Main screen of BasicTimerX4]]
	\|-		\|-
	\|Developer		\|Developer
Line 94:		Line 94:
	\|-		\|-
	\|Website		\|Website
	\|<small>[https://www.rapmas.com/~~HydroLevelControl/~~ www.rapmas.com/HydroLevelControl/]</small>		\|<small>[https://www.rapmas.com/BasicTimerX4 www.rapmas.com/HydroLevelControl/]</small>
	\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.		\|}The BasicTimer4X is designed to configure and read the status of the hardware. Communication between the software and hardware is done with the integrated USB to Serial TTL over a USB micro cable. It supports 16 languages: English, German, French, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian (Latin), Czech, Slovakian, Polish, Danish, Swedish, Norwegian, and Finnish.