LaserDistance - Revision history

Admin: /* Supported devices */

2022-11-26T16:54:45Z

Supported devices

← Older revision		Revision as of 16:54, 26 November 2022
Line 12:		Line 12:
	* LaserDistanceDIN		* LaserDistanceDIN
	* LaserDistanceControl		* LaserDistanceControl
	* LaserDistanceLCD		* [[LaserDistanceLCD]]
	* LaserDistanceUSB		* LaserDistanceUSB

Admin at 08:00, 26 November 2022

2022-11-26T08:00:04Z

← Older revision		Revision as of 08:00, 26 November 2022
Line 1:		Line 1:
	== Description ==		== Description ==
	[[File:LaserDistance.webp\|alt=LaserDistance main software\|thumb\|LaserDistance]]		[[File:LaserDistance.webp\|alt=LaserDistance main software\|thumb\|LaserDistance]]
	LaserDistance is a software designed to use with LaserDistanceDIN, LaserDistanceUSB, LaserDistanceControl, and ~~LaserDistaceLCD~~ devices. It can configure a device language and measurement unit system on all devices. LaserDistanceDIN and LaserDistanceControl can be configured with the alarming behavior (visual and audio signals) and the relays. The current status of the configuration is also presented if the device is connected.		LaserDistance is a software designed to use with LaserDistanceDIN, LaserDistanceUSB, LaserDistanceControl, and LaserDistanceLCD devices. It can configure a device language and measurement unit system on all devices. LaserDistanceDIN and LaserDistanceControl can be configured with the alarming behavior (visual and audio signals) and the relays. The current status of the configuration is also presented if the device is connected.

	The configurations can be downloaded from the device and stored in local files for later examination or backup purposes.		The configurations can be downloaded from the device and stored in local files for later examination or backup purposes.
Line 12:		Line 12:
	* LaserDistanceDIN		* LaserDistanceDIN
	* LaserDistanceControl		* LaserDistanceControl
			* LaserDistanceLCD
	* LaserDistaceLCD
	* LaserDistanceUSB		* LaserDistanceUSB

Line 19:		Line 19:

	== Configuration ==		== Configuration ==
	[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|~~Laserdistance~~ connection language settings]]		[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|LaserDistance connection language settings]]
	Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.		Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.

Line 33:		Line 33:

	Device language can be changed by drop-down menu, it supports the same 18 languages as the program: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian and Finnish After You changed the language, You must save the configuration to the device. Measurement units can be configured as metric or imperial. By metric, the distance will be measured and presented in millimeters (mm), by imperial in inches (inch). Please note that by configuration in metric mode, use mm as whole numbers, and by imperial use decimals.		Device language can be changed by drop-down menu, it supports the same 18 languages as the program: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian and Finnish After You changed the language, You must save the configuration to the device. Measurement units can be configured as metric or imperial. By metric, the distance will be measured and presented in millimeters (mm), by imperial in inches (inch). Please note that by configuration in metric mode, use mm as whole numbers, and by imperial use decimals.
	[[File:Laserdistance device configuration.webp\|alt=Laserdistance device configuration\|center\|thumb\|744x744px\|~~Laserdistance~~ device configuration]]		[[File:Laserdistance device configuration.webp\|alt=Laserdistance device configuration\|center\|thumb\|744x744px\|LaserDistance device configuration]]

	=== Saving the configuration ===		=== Saving the configuration ===
Line 39:		Line 39:

	== Device information and status ==		== Device information and status ==
	[[File:Laserdistance device information.webp\|alt=Laserdistance device information\|thumb\|~~Laserdistance~~ device information]]		[[File:Laserdistance device information.webp\|alt=Laserdistance device information\|thumb\|LaserDistance device information]]
	If the device is connected, in the left bottom corner is presented the Device information.		If the device is connected, in the left bottom corner is presented the Device information.

Line 53:		Line 53:
	It shows the current language and the status of alarms and relays. These statuses are updated once a second.		It shows the current language and the status of alarms and relays. These statuses are updated once a second.

	[[File:Laserdistance device status.webp\|alt=Laserdistance device status\|center\|thumb\|529x529px\|~~Laserdistance~~ device status]]		[[File:Laserdistance device status.webp\|alt=Laserdistance device status\|center\|thumb\|529x529px\|LaserDistance device status]]

	In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.		In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.
	[[File:Laserdistance device ports photo.webp\|alt=Laserdistance device ports photo\|center\|thumb\|684x684px\|~~Laserdistance~~ device ports photo]]		[[File:Laserdistance device ports photo.webp\|alt=Laserdistance device ports photo\|center\|thumb\|684x684px\|LaserDistance device ports photo]]

	== Measurement ==		== Measurement ==
	[[File:Laserdistance measurement.webp\|alt=Laserdistance measurement\|thumb\|~~Laserdistance~~ measurement]]		[[File:Laserdistance measurement.webp\|alt=Laserdistance measurement\|thumb\|LaserDistance measurement]]
	Measurements can be programmed in the right top corner. Before You can begin with measurement, You must choose how long will be measured. This can be defined with the Measurement time (minutes), minimal time is 1 minute. After You defined the duration, You must choose the file name, where they will be stored measured data. It will have a .csv extension.		Measurements can be programmed in the right top corner. Before You can begin with measurement, You must choose how long will be measured. This can be defined with the Measurement time (minutes), minimal time is 1 minute. After You defined the duration, You must choose the file name, where they will be stored measured data. It will have a .csv extension.

Admin at 14:02, 14 November 2022

2022-11-14T14:02:40Z

← Older revision		Revision as of 14:02, 14 November 2022
Line 70:		Line 70:
	<code>15 , 56</code>		<code>15 , 56</code>

	That means that in 15. second of the measurement was measured 56mm distance. With these values, You can generate graphics or other scientific data analyzes.		That means that in 15. second of the measurement was measured 56mm distance. With these values, You can generate graphics or other scientific data analyzes..

Admin: /* Measurement */

2022-11-04T20:00:06Z

Measurement

← Older revision		Revision as of 20:00, 4 November 2022
Line 59:		Line 59:

	== Measurement ==		== Measurement ==
			[[File:Laserdistance measurement.webp\|alt=Laserdistance measurement\|thumb\|Laserdistance measurement]]
	Measurements can be programmed in the right top corner. Before You can begin with measurement, You must choose how long will be measured. This can be defined with the Measurement time (minutes), minimal time is 1 minute. After You defined the duration, You must choose the file name, where they will be stored measured data. It will have a .csv extension.		Measurements can be programmed in the right top corner. Before You can begin with measurement, You must choose how long will be measured. This can be defined with the Measurement time (minutes), minimal time is 1 minute. After You defined the duration, You must choose the file name, where they will be stored measured data. It will have a .csv extension.

Admin: /* Device information and status */

2022-11-04T19:56:59Z

Device information and status

← Older revision		Revision as of 19:56, 4 November 2022
Line 52:		Line 52:

	It shows the current language and the status of alarms and relays. These statuses are updated once a second.		It shows the current language and the status of alarms and relays. These statuses are updated once a second.

			[[File:Laserdistance device status.webp\|alt=Laserdistance device status\|center\|thumb\|529x529px\|Laserdistance device status]]

	In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.		In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.

Admin: /* Configuration */

2022-11-04T19:47:06Z

Configuration

← Older revision		Revision as of 19:47, 4 November 2022
Line 33:		Line 33:

	Device language can be changed by drop-down menu, it supports the same 18 languages as the program: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian and Finnish After You changed the language, You must save the configuration to the device. Measurement units can be configured as metric or imperial. By metric, the distance will be measured and presented in millimeters (mm), by imperial in inches (inch). Please note that by configuration in metric mode, use mm as whole numbers, and by imperial use decimals.		Device language can be changed by drop-down menu, it supports the same 18 languages as the program: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian and Finnish After You changed the language, You must save the configuration to the device. Measurement units can be configured as metric or imperial. By metric, the distance will be measured and presented in millimeters (mm), by imperial in inches (inch). Please note that by configuration in metric mode, use mm as whole numbers, and by imperial use decimals.
			[[File:Laserdistance device configuration.webp\|alt=Laserdistance device configuration\|center\|thumb\|744x744px\|Laserdistance device configuration]]

	=== Saving the configuration ===		=== Saving the configuration ===

Admin: /* Device information and status */

2022-11-04T19:44:16Z

Device information and status

← Older revision		Revision as of 19:44, 4 November 2022
Line 53:		Line 53:

	In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.		In the lower part of the window can You see the Device ports and the photo of the device ports. Depending on the device, it can show You the power connection, the switching port, connectors for the sensor, relays, etc. On the right bottom side is the photo of the connecting side and the position of the ports, so You can easily find the ports.
			[[File:Laserdistance device ports photo.webp\|alt=Laserdistance device ports photo\|center\|thumb\|684x684px\|Laserdistance device ports photo]]

	== Measurement ==		== Measurement ==

Admin: /* Device information and status */

2022-11-04T19:40:01Z

Device information and status

← Older revision		Revision as of 19:40, 4 November 2022
Line 38:		Line 38:

	== Device information and status ==		== Device information and status ==
			[[File:Laserdistance device information.webp\|alt=Laserdistance device information\|thumb\|Laserdistance device information]]
	If the device is connected, in the left bottom corner is presented the Device information.		If the device is connected, in the left bottom corner is presented the Device information.

Admin: /* Installation and setup */

2022-11-04T19:36:40Z

Installation and setup

← Older revision		Revision as of 19:36, 4 November 2022
Line 16:		Line 16:

	== Installation and setup ==		== Installation and setup ==
⚫	[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|Laserdistance connection language settings]]
	You can download the program from the software repository. LaserDistance is a freeware software, that can be installed on Windows 10 and 11. After the installation, You can start it from the Start Menu. At the left-right corner is the Connection part of the program. With a scan button, You can search for connected devices. Program language can be set from the same part. It supports 18 languages: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian, and Finnish. After You have chosen the correct language, restart the program to take effect.		You can download the program from the software repository. LaserDistance is a freeware software, that can be installed on Windows 10 and 11. After the installation, You can start it from the Start Menu. At the left-right corner is the Connection part of the program. With a scan button, You can search for connected devices. Program language can be set from the same part. It supports 18 languages: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian, and Finnish. After You have chosen the correct language, restart the program to take effect.

	== Configuration ==		== Configuration ==
		⚫	[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|Laserdistance connection language settings]]
	Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.		Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.

Admin at 19:35, 4 November 2022

2022-11-04T19:35:58Z

← Older revision		Revision as of 19:35, 4 November 2022
Line 16:		Line 16:

	== Installation and setup ==		== Installation and setup ==
		⚫	[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|Laserdistance connection language settings]]
	You can download the program from the software repository. LaserDistance is a freeware software, that can be installed on Windows 10 and 11. After the installation, You can start it from the Start Menu. At the left-right corner is the Connection part of the program. With a scan button, You can search for connected devices. Program language can be set from the same part. It supports 18 languages: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian, and Finnish. After You have chosen the correct language, restart the program to take effect.		You can download the program from the software repository. LaserDistance is a freeware software, that can be installed on Windows 10 and 11. After the installation, You can start it from the Start Menu. At the left-right corner is the Connection part of the program. With a scan button, You can search for connected devices. Program language can be set from the same part. It supports 18 languages: English, German, French, Italian, Portuguese, Spanish, Dutch, Hungarian, Croatian, Slovenian, Serbian, Czech, Slovak, Polish, Danish, Swedish, Norwegian, and Finnish. After You have chosen the correct language, restart the program to take effect.

	== Configuration ==		== Configuration ==
⚫	[[File:Laserdistance connection language settings.webp\|alt=Laserdistance connection language settings\|thumb\|Laserdistance connection language settings]]
	Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.		Loading the configuration can be done from a connected device or the file. An example of configuration files can be downloaded here. By connecting to the device, the current configuration of the device will be automatically loaded. If the device supports actions, like relays of alarms, it can be set up by Device configuration.