LaserDistance: Difference between revisions
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
The LaserDistance software can make measuring. The data are stored as Comma Separated Values (SCV) and contain the measured time (seconds from the beginning of the measurement) and the measured value (in mm or inch). |
The LaserDistance software can make measuring. The data are stored as Comma Separated Values (SCV) and contain the measured time (seconds from the beginning of the measurement) and the measured value (in mm or inch). |
||
== Supported devices == |
|||
With a LaserDistance software You can use four devices: |
|||
* LaserDistanceDIN |
|||
* LaserDistanceControl |
|||
* LaserDistaceLCD |
|||
* LaserDistanceUSB |
|||
Revision as of 13:19, 4 November 2022
Description
LaserDistance is a software designed to use with LaserDistanceDIN, LaserDistanceUSB, LaserDistanceControl, and LaserDistaceLCD devices. It can configure a device language and measurement unit system on all devices. LaserDistanceDIN and LaserDistanceControl can be configured with the alarming behavior (visual and audio signals) and the relays. The current status of the configuration is also presented if the device is connected.
The configurations can be downloaded from the device and stored in local files for later examination or backup purposes.
The LaserDistance software can make measuring. The data are stored as Comma Separated Values (SCV) and contain the measured time (seconds from the beginning of the measurement) and the measured value (in mm or inch).
Supported devices
With a LaserDistance software You can use four devices:
- LaserDistanceDIN
- LaserDistanceControl
- LaserDistaceLCD
- LaserDistanceUSB