BasicTimer4X: Difference between revisions
Jump to navigation
Jump to search
| Line 6: | Line 6: | ||
== Specification == |
== Specification == |
||
{| class="wikitable" |
{| class="wikitable" |
||
|+Specification table |
|||
| ⚫ | |||
{| class="wikitable" |
|||
| ⚫ | |||
| ⚫ | |||
!Parameter |
!Parameter |
||
!Value |
!Value |
||
| Line 18: | Line 15: | ||
|220 VAC or 5 VDC over USB |
|220 VAC or 5 VDC over USB |
||
|- |
|- |
||
|Sensor type |
|||
| ⚫ | |||
|Pressure transducer, 5 VDC |
|||
| ⚫ | |||
| ⚫ | |||
|Sensor range |
|||
|5 - 15 psi |
|||
| ⚫ | |||
|Sensor offset |
|||
|0.5 VDC (at 0 pressure) to 4.5 VDC (at maximal pressure) |
|||
| ⚫ | |||
|Inlet size |
|||
|1/8”-27 NPT |
|||
| ⚫ | |||
|LCD |
|||
|2.9" with blue background light |
|||
| ⚫ | |||
|Relay |
|||
|2 independent relays, maximal load 2A at 220VAC |
|||
|- |
|||
| colspan="2" |Software |
|||
|- |
|||
|Operation system |
|||
|Windows 8 and Windows 10 |
|||
|- |
|||
|Communication |
|||
|Serial over USB, TTL on device |
|||
|- |
|||
|Software functions |
|||
|Configuration and measurement |
|||
|} |
|} |
||
Revision as of 18:04, 3 December 2021
Description
BasicTimer4X is designed to provide a simple solution for timing and triggering. It contains a DIN rail mounted hardware and a software for configuration. Is powered with 220VAC, but can be also powered over a USB port.
4 relays can be configured in two modes, independent and cyclic. Each relay can be configured separately for timing or can be disabled. On the LCD You can read the current state of any relay (On or Off).
Specification
| Parameter | Value |
|---|---|
| Hardware | |
| Power | 220 VAC or 5 VDC over USB |
| Sensor type | Pressure transducer, 5 VDC |
| Sensor range | 5 - 15 psi |
| Sensor offset | 0.5 VDC (at 0 pressure) to 4.5 VDC (at maximal pressure) |
| Inlet size | 1/8”-27 NPT |
| LCD | 2.9" with blue background light |
| Relay | 2 independent relays, maximal load 2A at 220VAC |
| Software | |
| Operation system | Windows 8 and Windows 10 |
| Communication | Serial over USB, TTL on device |
| Software functions | Configuration and measurement |