BasicTimer4X

Description

BasicTimer4X is designed to provide a simple solution for timing and triggering. It contains a DIN rail mounted hardware and a software for configuration. Is powered with 220VAC, but can be also powered over a USB port.

4 relays can be configured in two modes, independent and cyclic. Each relay can be configured separately for timing or can be disabled. On the LCD You can read the current state of any relay (On or Off).

Specification

220 VAC or 5 VDC over USB

220 VAC or 5 VDC over USB

Parameter	Value
Hardware
Power	220 VAC or 5 VDC over USB