BasicTimer4X: Difference between revisions

From RAPMAS
Jump to navigation Jump to search
Line 6: Line 6:
== Specification ==
== Specification ==
{| class="wikitable"
{| class="wikitable"
|+Specification table
|+
{| class="wikitable"
|+
|}
!Parameter
!Parameter
!Value
!Value
Line 18: Line 15:
|220 VAC or 5 VDC over USB
|220 VAC or 5 VDC over USB
|-
|-
|Sensor type
|
|Pressure transducer, 5 VDC
|
|-
|Sensor range
|5 - 15 psi
|-
|Sensor offset
|0.5 VDC (at 0 pressure) to 4.5 VDC (at maximal pressure)
|-
|Inlet size
|1/8”-27 NPT
|-
|LCD
|2.9" with blue background light
|-
|Relay
|2 independent relays, maximal load 2A at 220VAC
|-
| colspan="2" |Software
|-
|Operation system
|Windows 8 and Windows 10
|-
|Communication
|Serial over USB, TTL on device
|-
|Software functions
|Configuration and measurement
|}
|}

Revision as of 18:04, 3 December 2021

Description

BasicTimer4X is designed to provide a simple solution for timing and triggering. It contains a DIN rail mounted hardware and a software for configuration. Is powered with 220VAC, but can be also powered over a USB port.

4 relays can be configured in two modes, independent and cyclic. Each relay can be configured separately for timing or can be disabled. On the LCD You can read the current state of any relay (On or Off).

Specification

Specification table
Parameter Value
Hardware
Power 220 VAC or 5 VDC over USB
Sensor type Pressure transducer, 5 VDC
Sensor range 5 - 15 psi
Sensor offset 0.5 VDC (at 0 pressure) to 4.5 VDC (at maximal pressure)
Inlet size 1/8”-27 NPT
LCD 2.9" with blue background light
Relay 2 independent relays, maximal load 2A at 220VAC
Software
Operation system Windows 8 and Windows 10
Communication Serial over USB, TTL on device
Software functions Configuration and measurement