LaserDistanceControl
Revision as of 11:34, 13 December 2022 by Admin (talk | contribs) (Created page with "== Overview == LaserDistanceControl is a panel-mount controler and measurement device. Two relays can be used to control any process and two alarming source to informate about a critical value. It uses laser light to measure the distance between the sensor and the object. The measurement is based on the ToF (time of flight) of light from the source (sensor) and is the reflection (object). The measured distances can be shown in millimeters (mm) or inches (inch) in 18 dif...")
Overview
LaserDistanceControl is a panel-mount controler and measurement device. Two relays can be used to control any process and two alarming source to informate about a critical value. It uses laser light to measure the distance between the sensor and the object. The measurement is based on the ToF (time of flight) of light from the source (sensor) and is the reflection (object).
The measured distances can be shown in millimeters (mm) or inches (inch) in 18 different languages. Also, the device can be used to write measurement results in .CSV files. Configuration of a device is made with LaserDistance software.